2024 Hitachi Construction Machinery Compact Construction Equipment Wheel Loaders ZW30-5B

Information

2024 Hitachi Construction Machinery Compact Construction Equipment Wheel Loaders ZW30-5B

BUILT TO PERFORM.

The Hitachi ZW30 is our smallest wheel loader, but it packs in everything you need on the job site: productivity, comfort, advanced technology, environmental performance and easy maintenance.

Photos

Highlights

  • Belmont, Ohio
  • 2024
  • Hitachi Construction Machinery
  • Compact Construction Equipment Wheel Loaders ZW30-5B
  • Model: D1703-M-DI
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Available
  • over tires: 4'11" (1,505 mm) | Bucket: 5'2" (1,570 mm) | Fork: 4' (1,215 mm)
  • to hinge pin, fully raised: 8'10" (2,685 mm) | Dump clearance 45 degree, full height: 6'8" (2,025 mm) | Reach, 45 degree dump, full height: 2'11" (880 mm) | Reach @ MaxHinge Pin: 2'4" (720 mm) | Fork Height @ Max Reach: 4'4" (1,330 mm) | Fork Height @ MaxHinge Pin Height: 8'7" (2,625 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Compact Construction Equipment Wheel Loaders
  • ZW30-5B
  • Compact
  • Model: D1703-M-DI
  • Kubota
  • Gross power (ISO 14396): 25 HP/2,200 RPM (18.5 kW/2,200 RPM) | Net power (ISO 9249): 24 HP/2,200 RPM (17.9 kW/2,200 RPM)
  • 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler | Module type: Forced circulation type
  • 3
  • 3.4" (87 mm)
  • 3.6" (92.4 mm)
  • Total: 101 in3 (1.647 liters)
  • Dry type (double element)
  • Motor: DC 12V-2.7 HP (2.0 kW)
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Pump: Electronically controlled, common rail type
  • All speed electrical type
  • DC 12V-800 CCA (110 Ah), 2 units
  • DC 12V-60A (0.72 kW)
  • Tread: 3'11" (1,180 mm) | Loader clearance radius, bucket in carry position: 11'10" (3,610 mm) | Max. roll back at carry position: 50 deg | Reach @ Ground Level: 2'5" (735 mm) | MaxImum Reach: 4'2" (1, 275 mm) | Loader clearance radius, Fork in carry position: 12'9" (3,875 mm)
  • 14'3" (4,335 mm) | 16'5" (4,995 mm)
  • bucket on ground (with ROPS/FOPS cab): 8'3" (2,515 mm) /8'2" (2,485 mm) | operating: 11'7" (3,525 mm) | fork on ground (with ROPS/FOPS cab): '2" (2,485 mm) /8'3" (2,515 mm)
  • over tires: 4'11" (1,505 mm) | Bucket: 5'2" (1,570 mm) | Fork: 4' (1,215 mm)
  • 5'10" (1,780 mm)
  • 10" (255 mm)
  • centerline of outside tire: 9'10" (3,005 mm)
  • to hinge pin, fully raised: 8'10" (2,685 mm) | Dump clearance 45 degree, full height: 6'8" (2,025 mm) | Reach, 45 degree dump, full height: 2'11" (880 mm) | Reach @ MaxHinge Pin: 2'4" (720 mm) | Fork Height @ Max Reach: 4'4" (1,330 mm) | Fork Height @ MaxHinge Pin Height: 8'7" (2,625 mm)
  • Digging (horizontal digging angle): 2" (55 mm)
  • Fork Tine: 3'11" (1,195 mm)
  • 9'10" (3,005 mm)
  • Tank (diesel fuel): 11.1 gal / 42 L
  • Engine lubricant (including oil pan): 1.5 gal / 5.6 L | T/M: 0.5 gal / 1.8 L | Axle (front/rear): 1.2/1.2 gal / 4.5/4.5 L
  • Engine: 1.2 gal / 4.5 L
  • Oil tank: 7.1 gal / 27 L
  • Operating weight: 7,310 lb (3,315 kg) /6,800 lb (3,085 kg)